In short
Many properties in Livonia, particularly commercial properties, properties with irrigation systems, and multi-unit buildings, are required to test backflow prevention devices annually. Rock Service Pros provides certified testing to verify that a device works and meets local requirements. We also handle the required testing documentation and offer upfront, flat-rate pricing before work begins.
What backflow means for drinking water
Backflow is water moving backward into the drinking water supply. A disruption in water pressure can draw other materials into the supply; pumps or water heating devices can also overcome water system pressure. Michigan prohibits unprotected cross connections, which are plumbing arrangements through which backflow can occur. Community water supplies must have cross-connection prevention programs that include inspections, testing, recordkeeping, and education.
Water distribution systems are designed to maintain continuous positive pressure. During a backflow incident, contamination can occur through plumbing and points of use, and many incidents go undetected. A backflow preventer stops water from flowing backward. The prevention method needs to fit the specific connection, and a local water system cross-connection inspector can identify connections and determine the protection needed. Michigan's drinking water rules and plumbing code both address cross connections.
Which Livonia properties may need testing
Many properties in Livonia and nearby communities are required to test backflow prevention devices annually, particularly these property types:
- Commercial properties with backflow prevention devices.
- Properties with irrigation systems and backflow prevention devices.
- Multi-unit buildings with backflow prevention devices.
We can help confirm what applies to a specific property. Residential properties can also have backflow risks at irrigation connections, sinks, toilets, and hose bibs. A high-hazard water use is one considered hazardous to human health. Public water supplies must develop cross-connection programs for all customer types, including residential customers. Older plumbing or do-it-yourself projects in a home may leave cross connections unprotected. Lawn irrigation systems and connections to chemically treated water are examples of high-hazard uses.
When a testable assembly needs a test
Michigan's guidance identifies reduced pressure principle backflow assemblies, pressure vacuum breakers, and double check valve assemblies as testable assemblies. Testing is called for in these circumstances:
- At installation or relocation, including reinstallation of a seasonal assembly.
- After a repair to the assembly.
- At the frequency set by an approved cross-connection control program.
The testing guidance also specifies qualifications for the person performing the test, including active ASSE 5110 certification and the applicable plumbing credentials or supervision.
What happens during testing
We provide certified annual testing to verify that a backflow preventer is working and meets local requirements. We handle the testing and the required documentation for compliance, and offer upfront, flat-rate pricing before work begins. For a seasonal assembly, testing before it is put into service is also recommended. For noncommunity water systems, applicable assemblies must be winterized to the manufacturer's specifications and checked for leaks at the beginning of each operating season. A testable assembly includes the backflow preventer valve, isolation valves immediately upstream and downstream, and test cocks.
Installation results and Livonia inspections
Livonia's Inspection Department provides plumbing inspections and issues permits. Its video inspection program lists installation of backflow devices accompanied by backflow test results emailed to the plumbing inspector. For permits, applicants can review project requirements, apply online through the department's portal, and track application status.
Frequently asked questions
Is there one annual testing date for every backflow assembly?
The testing frequency for a testable assembly is set by an approved cross-connection control program. Michigan's guidance also calls for testing upon installation and after repair or relocation.
Who can test an assembly connected to a public water supply?
In Michigan, a person testing a backflow prevention assembly within or connected to a public water supply must hold ASSE 5110 certification.
What kinds of water uses are classified as high hazard?
Examples of water uses classified as high hazard include:
- Lawn irrigation systems.
- Dental and medical equipment.
- Pools and spas.
- Connections to sewer lines or sewage pumps.
- Connections to chemically treated water.
Sources
- Cross Connection Control. Michigan Department of Environment, Great Lakes, and Energy.
- Backflow Assembly Testing. Michigan Department of Environment, Great Lakes, and Energy.
- BCC-EGLE Joint Interpretive Statements - Final. Michigan Department of Licensing and Regulatory Affairs and Michigan Department of Environment, Great Lakes, and Energy.
- Video inspection program. City of Livonia Inspection Department.
- Inspection (Building and ordinance) Department, Livonia, MI. City of Livonia.



